10 Insanely Simple Hacks To Make Your Pool Sparkle Like A Diamond!

Hey fellow pool enthusiasts! Are you tired of diving into a murky and unclean pool? Swimming pools are a great way to stay cool and active during the summer months. However, if not properly maintained, your pool can become a cesspool of germs and contaminants.

Well, we’ve got just the cleaning guide for you! You don't have to break the bank to keep your swimming pool in mint condition. Follow our ten simple steps to make sure your pool is clean, safe, and enjoyable for all who use it. So, grab your sunscreen, throw on your favorite swimsuit, and let's dive into the ultimate guide of how to clean a swimming pool!

Step 1: Remove Debris from the Pool Surface. Before you start cleaning the pool, you want to remove any debris that may be floating on top of the water. Leaves, bugs, and excess pool chemicals can cloud the water, but by skimming it regularly, you’ll be removing anything that may have fallen in.

Step 2: Vacuum the Pool – Vacuuming your swimming pool is essential for keeping it clean and free of dirt and debris. Use your vacuum hose to suck up any dirt and debris on the floor or walls of the pool. Be sure to move slowly so that all dirt particles are picked up. If you have stubborn stains on concrete surfaces, use a brush attachment on your vacuum hose to scrub them away before vacuuming them up.

Step 3: Brush Walls and Floor of Pool – After vacuuming, use an algaecide-safe brush to scrub away any remaining dirt or bacteria from the walls and floors of your swimming pool. Regular brushing will help prevent algae buildup and make your pool look sparkling clean.

Move methodically around the entire perimeter of your pool using consistent strokes with gentle pressure. This will help loosen any stubborn stains as well as remove excess algae growth from surfaces.                  

Step 4: Balance Pool Chemicals – Balancing chemical levels in your swimming pool is important for preventing algae growth as well as ensuring safe swimming conditions for everyone in the water. Test the pH levels with test strips or test kits purchased at local stores or online retailers. Add chemicals such as chlorine accordingly, adjust the alkalinity, etc. Follow the manufacturer’s instructions closely if you do make any adjustments.

Step 5: Shock Your Pool – Shocking your swimming pool helps keep it free of bacteria and contaminants by killing off unwanted organisms living in it. Follow the manufacturer’s instructions when shocking your pool. Test the water afterwards.

Step 6: Clean Skimmer Baskets And Pump Strainers – To ensure optimal filtration performance from your pump system, clean the skimmer baskets and pump strainers regularly throughout summer months by removing lint/debris buildup with a garden hose or small brush/vacuum attachment. Replace the strainer basket gaskets if necessary for a proper seal around the pipes leading into the pump system.  

Step 7: Empty Automatic Chlorinators And Clean Filters – Automatic chlorinators should be emptied and cleaned every few weeks during the peak season. This ensures that chlorine tablets are dissolved properly into the water without clogging filter systems or affecting the pump's performance.

Step 8: Check Filter Pressure Gauge Regularly– Monitoring the filter pressure gauges regularly throughout the summer months allows you to tell when the filters need cleaning. Replace the filter elements if the pressure increases beyond the recommended limits set by the manufacturer.

Step 9: Backwash Sand Filters When Necessary– Sand filters require backwashing every few weeks depending on the usage. Shut off the pump system prior to backwashing the filters; then turn it back on once the filter has been flushed out completely.  

Step 10: Inspect Plumbing System– Once all the steps above have been completed it's important to inspect the plumbing systems for leaks since these can cause significant damage over time if not caught early enough. Check all unions/connections with a flashlight; then tighten the joints with a pipe wrench if needed.

Additional Things That Yo can do To Help Clean Your Pool Clean:

Get a Robot- We are talking about a cleaning robot! These nifty devices will vacuum the bottom of your pool, leaving it cleaner and sparkling bright.

Use a Clarifier- A clarifier will help make your pool water crystal clear by binding any small particles together, making them easier to filter out. Just add it to your pool, and watch the magic happen!

Cover Your Pool- Use a pool cover to avoid debris and leaves falling into your pool. This simple trick will make a huge difference in the cleanliness of your pool.

So there you have it, folks! Cleaning a swimming pool doesn't have to be a dreadful chore. With these epic tips and hacks, you'll be sipping on a fruity drink by your sparkling pool in no time. Remember to keep your pool deck tidy and your chemicals balanced, and you'll be the envy of all your friends. And who knows, your pool might just be the next hotspot for all the summer parties.

So grab your favorite scrub brush, turn up the poolside tunes, and let's get cleaning! Don't forget to share this article with your fellow pool owners and spread the buzz to make pool cleaning a breeze!

If you are not sure which swimming pool to purchase so that you can test your pool cleaning swimming skills then click the button below to see which swimming pools that we have reviewed just for you and your loved ones!